« go back to home page

MS Nysa

stl files to print on your own 3d printer

20 stl files, 32 parts

Model of the Polish general cargo ship MS Nysa in the scale of 1:250.
Model length: 24 cm (9.5 in), height: 9 cm (3.5 in), height with a stand: 11 cm (4.3 in).
Requires a 20x20 cm bed,
Easy to print - no need any supports, brims or raft.
After ballasting, it floats in calm water.

Donate and get the MS Nysa files!

You can set the amount you want to pay!
Treat the amount as a donation and reward for our hard work.

USD Enter the amount above.

Before paying, make sure you have downloaded and tested our free model:
Small fishing boat

After payment is confirmed you will receive an email from Printed Toys with download link.
This link will be active for 7 days from you payment, but you can download the files and store them locally for any length of time.

Assembly manual

Needed parts or materials (suggested, you can use other matches parts)

cyanoacrylate glue (needed to stick the propeller and booms).

Introduction

We tested PLA filament, nozzle 0.4 mm, but you can test other settings.
All files are in print-ready positions, you don't have to rotate it on your slicer.
To fit the model's hull on a 20x20 cm table, place it diagonally.
Print all elements with 100% filling.
Elements containing "x2" in the name should be printed twice.
Two plates with names are attached to the model: MS Nysa (the ship sank with the entire crew) and MS Pilica. These were vessels from a longer series of B-51 ships.
You can ballast the model with M6 nuts (there are special guides in the bottom). After ballasting, the ship will be able to stay on calm water.