MS Nysa

MS Nysa - Assembly manual

Needed parts or materials (suggested, you can use other matches parts)

• cyanoacrylate glue (needed to stick the propeller and booms).

Introduction

• We tested PLA filament, nozzle 0.4 mm, but you can test other settings.
• All files are in print-ready positions, you don't have to rotate it on your slicer.
• To fit the model's hull on a 20x20 cm table, place it diagonally.
• Print all elements with 100% filling.
• Elements containing "x2" in the name should be printed twice.
• Two plates with names are attached to the model: MS Nysa (the ship sank with the entire crew) and MS Pilica. These were vessels from a longer series of B-51 ships.
• You can ballast the model with M6 nuts (there are special guides in the bottom). After ballasting, the ship will be able to stay on calm water.

Test file

Check if your printer will be able to print the model: download and print one of the most complicated parts in the model .

Assembly manual movie

Click to see assembly manual on Youtube.
Turn on subtitles (if available) to see part names. Do not use YouTube auto translate.
You can pause the movie and skip frames using "<" and ">" buttons from your keyboard.

License

After purchase files you can:

• print an unlimited number of models,
• modify and print modified files,
• print models for a gift,
• use printed models for free education.

You can not:

• use models for earn money,
• sell printed models,
• sell any stl files (original or modified),
• publish or distribute any stl files.